Electrical Panel Upgrade in Thousand Oaks
A kitchen remodel, a new pool pump, or an EV charger can push an older panel past what it was ever designed to handle, and that’s usually the moment a Thousand Oaks homeowner calls us about a panel upgrade.
Thousand Oaks homes have a median construction year of 1978, so a lot of the panels we upgrade started out as 100-amp services built for a much lighter household load than a modern kitchen, pool, or EV charger actually draws.
You’re in good hands. Our team will follow up promptly.
Why Upgrades Here Often Tie to Home Improvement Projects
With a median construction year of 1978, most Thousand Oaks homes were wired for a household that didn’t have central air, an EV charger, or a pool pump running off the same panel. Add a kitchen remodel or a new pool, and a 100-amp panel that was fine for decades suddenly can’t cover the load safely.
Pool equipment is one of the most common triggers we see. A pool pump, heater, and pool lighting can add up to more than an older panel has room for, both physically (open breaker slots) and electrically (amperage), which is when a straightforward remodel job turns into a panel upgrade project.
What's Included in a Panel Upgrade
- Load calculation confirming the new panel size actually covers your home’s current and planned electrical demand
- Municipal permit filing with the City of Thousand Oaks before any work begins
- Installation of a modern, outdoor-rated enclosure sized for future circuits
- Bonding of gas and water piping to meet current code
- AFCI protection added across applicable circuits
We cover the full upgrade process on our main Electrical Panel Upgrade service page. This page focuses specifically on what that looks like in Thousand Oaks.
FOR HOMEOWNERS
A Recent Thousand Oaks Panel Upgrade
A homeowner in Thousand Oaks called us while planning a kitchen expansion that also involved adding a new pool pump, on a home still running its original 100-amp panel from the 1970s. Between the added kitchen circuits and the pool equipment, the existing panel had no room left and no margin on amperage.
We upgraded the service to a 200-amp panel in a NEMA 3R outdoor-rated enclosure with 42 circuit spaces, giving the home enough capacity for the kitchen remodel, the pool pump, and future additions without another upgrade down the line. We also added AFCI protection across the bedroom circuits while the panel was open, since those circuits were still on older breakers.
The permit was filed with the City of Thousand Oaks before work began, and the final inspection passed on the first visit.
Electrical Panel Upgrade Pricing in Thousand Oaks
| Situation | Starting Price | Notes |
|---|---|---|
| Standard 100A to 200A upgrade | From $1,000 | Covers panel swap, breakers, and labor for a straightforward amp increase |
| Upgrade with full panel replacement | From $1,200 | For panels that also need the enclosure and main breaker replaced, not just upgraded |
| Upgrade supporting a pool or major remodel | From $1,000 | Priced based on the added circuits and load from pool equipment or remodel work |
Final pricing depends on site conditions, materials, and permit requirements. Call for a free on-site estimate.
What Ojai Customers Say
“We were adding a pool and needed our panel upgraded before the pool company could finish their electrical hookups. The team got it done quickly and coordinated directly with the pool contractor so there was no delay.”
Warren M.
“Our 100-amp panel was original to the house and clearly maxed out. They walked us through exactly why 200 amps made sense for our remodel and had the new panel in within a day.”
Joanne S.
Serving Thousand Oaks and Nearby Ventura County
For general information about our coverage of this city, see our Thousand Oaks service page, or visit theVentura County service area hub to see every city and service we cover in the county.
Common Questions About Panel Upgrades in Thousand Oaks
Do I need a panel upgrade before installing a pool?
In most cases, yes. Pool pumps, heaters, and lighting add enough load that an older 100-amp panel often doesn’t have the capacity or open breaker space to support them safely.
How long does a panel upgrade take?
A standard upgrade typically takes 4-8 hours in a single day, though scheduling around the city permit and inspection can add a few days to the overall timeline.
Do I need a permit for a panel upgrade in Thousand Oaks?
Yes, a panel upgrade requires a permit and inspection from the City of Thousand Oaks. We handle the filing and scheduling as part of the job.
Will my power be off during the upgrade?
Yes, power is off for the portion of the day we’re actively working on the panel, usually a few hours. We coordinate timing with you in advance so it’s not a surprise.
For company-level questions, see our general FAQ.
Scchedule Your Service Today
Tell us what you need, and our team will get in touch to discuss your project and
help you take the next step.
You’re in good hands. Our team will follow up promptly.