A 400 amp service upgrade is one of the biggest electrical decisions an Arcadia homeowner can make, and it is also one of the most misunderstood. Many people hear the phrase and picture a single giant panel on the side of the garage. In practice, most homes that get 400 amp service in Southern California Edison territory end up with a special meter socket that feeds two 200 amp panels. That one detail changes the cost, the layout, and the question of whether you truly need it.
Arcadia is a natural place for this conversation. Across neighborhoods like the Highlands and Santa Anita Oaks, older ranch homes are being expanded or replaced with much larger houses that run multiple air conditioning zones, EV chargers, pool equipment, and heat pump appliances. The city’s own permit records show these projects clearly, including a residential permit to upgrade an existing 200 amp service to 400 amps. If you are planning a rebuild, a major addition, or a full electrification project, this guide will help you decide whether 400 amps is the right move or an expensive overcorrection.
KEY TAKEAWAYS
- Most residential 400 amp services in SCE territory use a Class 320 meter socket.
- A Class 320 service carries 320 amps continuously and feeds two separate 200 amp panels.
- A proper load calculation, not square footage, decides whether your home truly needs 400 amps.
- Arcadia permit reports show residential service change permit fees under $100 in December 2025.
- Fixr’s national guide puts upgrades to 400 amp service at roughly $8,000 to $12,000.
- California’s 2025 Energy Code, effective January 1, 2026, makes heat pumps the new-home baseline.
- Zero-emission vehicles made up 18.9% of California new car sales in late 2025.
- Load management or a subpanel can sometimes deliver the capacity you need without 400 amps.
What 400 Amp Service Actually Means in SCE Territory
The number on a service upgrade quote is not always the number your home can use all day. Most residential services sold as 400 amps are built around what the utility industry calls a Class 320 meter socket. That equipment is designed to carry 320 amps of continuous load, with a maximum rating of 400 amps for short periods. Inside or right next to that meter enclosure sit two 200 amp breakers, and each one feeds its own panel.
Why does that matter? Because the math of your house has to fit inside 320 amps of steady use, not 400. For almost every home, that is still an enormous amount of power. A 200 amp service gives you roughly 48,000 watts of capacity at 240 volts. A Class 320 service raises the continuous ceiling to about 76,800 watts. That is enough for a very large home with several heavy loads running at once.
There is a second, less common path. A true 400 amp service that runs at full capacity continuously typically uses current transformer metering, often called CT metering. The utility installs a separate cabinet with transformers that scale the current down so the meter can read it. CT metering is common on commercial buildings and very large estates, and it usually costs more and takes longer to design. For most Arcadia homes, the Class 320 approach is the practical choice.
Who Sets the Rules for Your Service
Southern California Edison publishes its Electrical Service Requirements manual for electricians, engineers, and builders. It spells out approved meter panels, clearances, grounding, and how overhead and underground services must be built. Your electrician designs the service equipment on your property, and SCE decides how power reaches it from the street. Both sides have to line up before the lights come back on.
Loads That Push Arcadia Homes Toward a 400 Amp Service Upgrade
A service upgrade is really about adding up what your home might run at the same time. In larger Arcadia homes, we tend to see the same group of heavy loads show up together. Any one of them is manageable on 200 amps. Several of them combined is when the conversation about 400 amps starts to make sense.
- Two or more Level 2 EV chargers. Each one typically needs a 40 or 50 amp circuit, and households with two EVs often want both charging overnight.
- Multi-zone heat pump HVAC. Large homes often run two or three separate systems, each with its own outdoor unit and backup heat strips.
- Heat pump water heaters and induction ranges. Switching from gas to electric cooking and water heating adds steady load that older homes were never sized for.
- Pools, spas, and outdoor kitchens. Pumps, heaters, lighting, and refrigeration add up fast in the backyard.
- Guest houses, casitas, or detached studios. A second living space usually needs its own subpanel and a real share of the home’s capacity.
- Home gyms, workshops, and media rooms. Dedicated circuits for equipment, dehumidifiers, and audio systems quietly consume capacity.
If your plans include three or more of these items, a 400 amp service upgrade deserves a serious look. If you only have one or two, a well-designed 200 amp service is often enough, especially with smart load management.
The Load Calculation Decides, Not the Square Footage
It is tempting to use square footage as a shortcut. Cost guides often say homes over 4,000 square feet usually need more than 200 amps. That is a starting point, not an answer. The only reliable way to size a service is a load calculation done the way the National Electrical Code lays it out.
A load calculation counts general lighting and outlets by area, then adds kitchen appliances, laundry, HVAC, water heating, EV charging, pool equipment, and every other fixed load. It then applies demand factors, which recognize that not everything runs at full power at the same moment. The result is a calculated load in amps. If that number lands comfortably under 200 amps, you do not need 400. If it lands close to or above 200, you have real choices to make.
“Never size a service by the size of the house or by what the neighbor did. Run the load calculation first. It tells you whether you need more capacity or just a smarter way to manage what you already have.”
– Dikran, High Voltage Electrical
A good load calculation also looks ahead. If you plan to add an EV charger in two years or convert a gas furnace to a heat pump, those loads belong in today’s math. Upgrading once, with a clear view of the next decade, usually costs less than upgrading twice.
200 Amp vs Class 320 vs CT-Metered 400 Amp Service
The table below compares the three service types Arcadia homeowners usually weigh during a major remodel or rebuild. It shows how continuous capacity, equipment layout, and utility involvement change as you move up from a standard 200 amp service.
| Feature | 200 Amp Service | Class 320 (Sold as 400 Amp) | CT-Metered 400 Amp |
|---|---|---|---|
| Continuous capacity | About 200 amps | 320 amps | 400 amps |
| Watts at 240 volts | About 48,000 | About 76,800 | About 96,000 |
| Typical layout | One main panel | Meter socket feeding two 200 amp panels | CT cabinet, meter, and main distribution |
| Utility involvement | Standard SCE service change | SCE review, possible service or transformer work | SCE design review and CT metering equipment |
| Best fit | Most homes, even with one EV | Large homes with several heavy loads | Estates or loads beyond 320 amps continuous |
For most large Arcadia homes that truly outgrow 200 amps, the middle column is where the project lands. The split panel design also has a practical benefit. You can dedicate one panel to the main house and the other to EV charging, the pool, or a guest house, which keeps circuits organized and makes future troubleshooting easier.
How SCE Coordination Works for a 400 Amp Upgrade
A service upgrade is a shared project between your electrician, the City of Arcadia, and Southern California Edison. The electrician handles design, permits, and the equipment on your side of the meter. SCE handles the conductors and equipment that bring power to your home. Here is how the process usually flows.
- Load calculation and design. Your electrician confirms the size you need and drafts the new service layout.
- Service request to SCE. The request tells SCE the new service size, location, and whether the home is fed overhead or underground.
- Utility review. SCE checks whether its service drop, underground lateral, or neighborhood transformer can carry the added load. A big jump in capacity can trigger utility work on their side.
- City permit and installation. Once the plan is set, the electrician pulls the permit and installs the new meter socket, breakers, panels, and grounding.
- Inspection and reconnection. The city inspects the work, then SCE sets the meter and restores power.
Timing depends heavily on the utility side. A simple service change can move quickly. A project that needs new underground conductors or transformer work takes longer, so it pays to start the SCE conversation early, especially if your upgrade is tied to a construction schedule.
Overhead vs Underground Service
Many older Arcadia streets still have overhead service drops, while newer rebuilds often convert to underground. Moving underground usually means trenching, new conduit, and coordination about where the pull box and meter sit. It can add cost, but it also cleans up the look of the property and removes the mast from the roofline.
Arcadia Permits and Inspections
Any service change in Arcadia requires an electrical permit through the city. The good news is that the permit fee itself is rarely the expensive part. The city’s December 2025 permit activity report lists residential service change permits with fees under $100. The real cost of a service upgrade is in the equipment, labor, and any utility work.
The inspector will look at grounding and bonding, conductor sizing, breaker ratings, working clearances around the equipment, and labeling. Newer code editions also require an emergency disconnect at a readily accessible outdoor location for one and two family homes when the service equipment is replaced. That requirement can affect where your new equipment goes, so it belongs in the design from day one.
Always work with a licensed C-10 electrical contractor who pulls the permit in their name. Unpermitted service work can create problems with insurance, resale disclosures, and SCE reconnection.
What a 400 Amp Service Upgrade Costs
Fixr national cost guide estimates put upgrades to 400 amp service at roughly $8,000 to $12,000, and other published estimates start closer to $4,000 for simpler jobs. That wide spread is exactly why online averages are only a rough guide. The final price depends on what your specific property needs.
The biggest cost drivers usually include:
- Utility-side work. Whether SCE needs to upgrade the service drop, underground lateral, or transformer.
- Overhead to underground conversion. Trenching, conduit, and restoration of hardscape or landscaping.
- Equipment location. Moving the meter or panels to meet clearance or outdoor disconnect rules.
- Distribution changes. Adding subpanels for a guest house, garage, or backyard loads.
- Circuit work. Relocating or rebalancing existing circuits between the two new panels.
- Wall and stucco repair. Patching finishes after equipment is removed or relocated.
A written quote should separate these items so you can compare apples to apples. Our electrical panel upgrade service starts with a load calculation and a site visit so the estimate reflects your home, not a national average.
Planning Around California’s Electrification Push
Part of the reason 400 amp questions keep coming up is that California keeps moving toward all-electric homes. The state’s 2025 Energy Code update took effect on January 1, 2026, and it makes heat pumps for both space heating and water heating the baseline for newly built single-family homes. It also applies to major additions and alterations, which covers many of the large remodels happening across Arcadia.
EV adoption is the other big driver. The California Energy Commission reports that zero-emission vehicles made up 18.9% of new car sales in the fourth quarter of 2025, and the state passed 2.5 million cumulative ZEV sales. That growth happened even after federal EV incentives ended on September 30, 2025. For families with two EVs, dedicated EV charger installation is often the load that tips the calculation.
A Note on Rebates
A service upgrade on its own is not usually a rebate item. Incentives, when available, tend to attach to qualifying electrification projects such as heat pump HVAC or heat pump water heaters, where panel or service work is part of the larger job. Programs change often, funding can be limited, and eligibility varies. We can help you check what applies and handle the paperwork, but no one should promise you a specific rebate before the eligibility review is done.
When 200 Amps Is Still the Smarter Choice
Not every large home needs 400 amps. In many cases, a well-planned 200 amp service with modern tools delivers what you need at a much lower cost.
- EV load management. Many chargers can share a circuit or throttle down automatically when the house is using a lot of power.
- Smart panels. Some panels monitor and shed noncritical loads so the service never exceeds its rating.
- Strategic subpanels. A subpanel installation can organize a garage, guest house, or backyard without increasing the service size.
- Efficient equipment. Modern variable-speed heat pumps and heat pump water heaters draw less than older resistance equipment.
The right answer depends on your calculated load, your future plans, and your budget. The honest goal is to buy the capacity you will actually use, not the biggest number on the price sheet.
How to Get Started
If you are planning a rebuild, a big addition, or a switch to all-electric appliances, start with these steps.
- List every large appliance and system you have now and plan to add in the next ten years.
- Schedule a site visit and a formal load calculation with a licensed electrician.
- Ask for a quote that separates panel work, utility coordination, trenching, and finish repair.
- Start the SCE service request early if your project has a construction deadline.
- Confirm that permits, inspection, and the outdoor disconnect location are included in the plan.
A 400 amp service upgrade is a long-term investment in how your home will run for decades. When it is sized correctly, it quietly supports every EV, heat pump, and backyard project you add. When it is oversized, it is money that could have gone elsewhere. If you want a clear answer based on your own home, our team serving Arcadia homeowners can run the load calculation, coordinate with SCE, and walk you through every option before you commit.